Fewer clogged filters
Help reduce the dirt and sediment reaching your generator’s filters.
← All systems
ADVANCED FUEL FILTRATION SOLUTIONSDiscuss the L-600View original product sheet ↗
Enclosed automated fuel maintenance
L-600
More capacity. Consistent fuel care.
The L-600 fuel filtration system supports standby tanks up to 15,000 gallons and small operating tanks. Water separation and two depth filters help manage contamination. Automated controls support regular treatment between generator runs. Jorge can help review the right setup for your tank.
Standby tanks up to15,000 gal
Published flow rate9.26 GPM
In the equipment
L-600 fuel filtration features.
- Water separation and two depth filters
- 7 inch touchscreen controls
- Connection capability for two tanks
- Modbus/IP communications and building management connectivity
- Powder coated or stainless steel cabinet options
Discuss the configuration, power requirements, and installation details for your location before ordering.
L-600 specifications
- Standby tank capacity
- Up to 15,000 gal
- Published flow rate
- 35 LPM / 9.26 GPM
- Water separator
- LGLS21532AA
- Depth filters
- LGSD × 2
- Controls
- PLC with 7 inch touchscreen
- Communications
- Modbus / IP
- Motor
- 2 HP, 4 poles, 1,440 RPM
- Plumbing
- 3/4 inch stainless steel hose
- Dimensions (W × H × D)
- 1,100 × 1,500 × 380 mm
- Weight
- 132 kg / 291 lb
- Published particle removal rating
- Down to 1 micron
- Published water removal rating
- Down to 50 ppm
- Operating temperature
- Minus 20°C to 50°C / minus 4°F to 122°F
Published equipment specifications. Listed capacities refer to standby tanks. Final selection depends on fuel condition, tank layout, operating duty, and equipment configuration.
The reason for routine filtration
Keep contamination
from becoming the problem.
Clean fuel supports your wider maintenance plan. Learn how fuel polishing works and how water and particle removal help address common sources of fuel related trouble.
Less water related trouble
Removing water helps reduce corrosion and conditions that support microbial growth.
Protection for fuel components
Fine particle filtration helps reduce abrasive wear in pumps and injectors.
Fuel care between generator runs
Automated systems make routine treatment part of your maintenance plan.
PLAN THE INSTALLATION
Make room for
better fuel care.
AFFS supplies your equipment, connects you with a local installation vendor, and stays involved to help coordinate the next steps. Start the conversation with your tank layout, available electrical supply, and planned installation location.
Review the L-600 for your sitePUBLISHED CABINET DIMENSIONS / W × H × D1,100 × 1,500 × 380 mm
EQUIPMENT WEIGHT132 kg / 291 lb
Allow appropriate access for installation and servicing. Confirm clearance, mounting, and electrical requirements with your installer.
A clearer next step
Is the L-600 right for your tank?
From your first question through installation, we’re with you every step.