In the equipment

L-350 fuel filtration features.

Water separator with automatic drain
One depth filter
7 inch touchscreen controls
Connection capability for two tanks
Modbus/IP communications and building management connectivity

Discuss the configuration, power requirements, and installation details for your location before ordering.

L-350 specifications

Standby tank capacity: Up to 3,000 gal
Published flow rate: 20 LPM / 5.3 GPM
Water separator: LG8514AA with automatic drain
Depth filters: LGSD × 1
Controls: PLC with 7 inch touchscreen
Communications: Modbus / IP
Motor: 2 HP, 4 poles, 1,440 RPM
Plumbing: 1/2 inch stainless steel hose
Dimensions (W × H × D): 1,100 × 1,500 × 380 mm
Weight: 110 kg / 242 lb
Published particle removal rating: Down to 1 micron
Published water removal rating: Down to 50 ppm
Operating temperature: Minus 20°C to 50°C / minus 4°F to 122°F

Published equipment specifications. Listed capacities refer to standby tanks. Final selection depends on fuel condition, tank layout, operating duty, and equipment configuration.

The reason for routine filtration

Keep contamination
from becoming the problem.

Clean fuel supports your wider maintenance plan. Learn how fuel polishing works and how water and particle removal help address common sources of fuel related trouble.

Fewer clogged filters

Help reduce the dirt and sediment reaching your generator’s filters.

Less water related trouble

Removing water helps reduce corrosion and conditions that support microbial growth.

Protection for fuel components

Fine particle filtration helps reduce abrasive wear in pumps and injectors.

Fuel care between generator runs

Automated systems make routine treatment part of your maintenance plan.

PLAN THE INSTALLATION

Make room for
better fuel care.

AFFS supplies your equipment, connects you with a local installation vendor, and stays involved to help coordinate the next steps. Start the conversation with your tank layout, available electrical supply, and planned installation location.

Review the L-350 for your site

PUBLISHED CABINET DIMENSIONS / W × H × D1,100 × 1,500 × 380 mm

EQUIPMENT WEIGHT110 kg / 242 lb

Allow appropriate access for installation and servicing. Confirm clearance, mounting, and electrical requirements with your installer.

A clearer next step

Is the L-350 right for your tank?

From your first question through installation, we’re with you every step.

Request a Consultation

L-350

Automated care for your standby fuel.